KitchenAid Ventilation Hood KHTU705R User Manual

®
30and 36Range Hoods  
OVERALL DIMENSIONS  
PRODUCT MODEL NUMBERS  
KHTU705S  
KHTU765S  
KHTU705R  
KHTU765R  
5 ⁷⁄₈" (14.9 cm) dia.  
exhaust collar  
Electrical: 120-V, 60-Hz, AC-only, 15 amp.  
electrical supply. Use copper wire only. A time-  
delay fuse or circuit breaker and separate circuit is  
recommended.  
Interchangeable  
front trim  
9 ¹⁵⁄₁₆"  
(25.2 cm)  
20 ³⁄₁₆”  
(51.3 cm)  
INSTALLATION CLEARANCES  
29 ¹⁵⁄₁₆” (76.0 cm) - 30” (76.2 cm) model  
35 ¹⁵⁄₁₆” (91.3 cm) - 36” (91.4 cm) model  
VENT AND ELECTRICAL OPENINGS AND MOUNTING  
SCREW LOCATIONS  
Centerline of  
exhaust collar  
9¹⁄₈”  
(23.2 cm)  
5⁷⁄₈”  
(14.9 cm)  
dia.  
1¹⁄₄”  
(3.2 cm)  
30”(76.2 cm) or  
36” (91.4 cm) min.  
cabinet opening width  
1³⁄₁₆”  
(3.0 cm)  
1⁵⁄₁₆”  
(3.3 cm)  
3⁵⁄₁₆”  
(10.0 cm)  
24” (61 cm) min.  
30” (76.2 cm)  
1⁵⁄₁₆”  
(3.3 cm)  
Centerline of  
hood  
suggested max.  
bottom of hood  
to cooking surface  
7¹⁄₂”  
(19.0 cm)  
Electrical  
knockouts  
70 ⁵⁄₁₆"  
(178.6 cm)  
min.  
76 ⁵⁄₁₆"  
(193.8 cm)  
max.  
18” (45.7 cm)  
min. clearance  
upper cabinet  
to countertop  
VENTING REQUIREMENTS  
This range hood is factory set for vented installations. Vent system  
can terminate through either the roof or a wall. The vent system  
length should not exceed 35 ft (10.7 m)  
to bottom of  
cabinet frame  
It is recommended that you use round vent instead of rectangular  
vent, especially if elbows are required.  
For best performance, use no more than three 90° elbows. If more  
than one elbow is used, make sure that there is a minimum of 24  
inches (61 cm) of straight vent between any two elbows. Do not  
install two elbows together.  
36” (91.4 cm)  
countertop  
height  
To calculate the length of system you need, add the equivalent  
feet (meters) from chart below for each vent piece that will be  
needed.  
Determine the length of the vent system you need  
To calculate the length of the vent system you need, add the  
equivalent feet (meters) from chart below for each vent piece that  
will be needed.  
Recommended standard 6(15.2 cm) fittings  
1 ft. round=  
1 ft. (0.3 m)  
90° elbow=  
5 ft. (1.5 m)  
45° elbow=  
2.5 ft. (0.8 m)  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Ref. 9763384  
09-11-06  
 

Integra DVD Player DPS 72 User Manual
Intel Network Cables 440GX User Manual
Intel Server SC5650HCBRPRNA User Manual
JVC Camcorder LYT2259 002B M User Manual
JVC CRT Television AV 20F476 User Manual
JVC VCR SR 9080 User Manual
Karcher Pressure Washer G 2650 OH User Manual
Kenwood Portable CD Player DPC X537 User Manual
Kenwood Stereo System SRC 402 User Manual
Kompernass CD Player KH 2331 User Manual